Avionics & Flight Control

Safety-critical flight control computers and avionics systems
Two Silver Atena employees discussing a black electronic assembly with multiple connectors at a workstation in the development laboratory.

Avionics and flight control for reliable flight functions

Avionics and flight control systems capture information on the state of an aircraft, process it within defined time limits and generate control and actuation commands for flight-relevant functions. Silver Atena develops electronic systems for safety-critical aerospace applications. We combine requirements engineering, system architecture and system integration, control unit development, hardware, embedded software, control development, safety, verification and qualification.

Discuss your avionics project

Challenges in avionics and flight control systems

Flight control functions must operate reliably, reproducibly and traceably, even under changing operating and environmental conditions.

Sensor information is acquired, checked for plausibility and combined with other system states. On this basis, the flight control functions calculate the required control and manipulated variables for actuators or connected systems. The system architecture provides the basis for aligning functions, computers, sensor, actuator and communication interfaces, timing requirements and safety requirements.

The key requirements include:

  • Executing flight functions reproducibly
    Sensor processing, control algorithms and actuation commands must be executed deterministically and within defined timing and functional limits.
  • Considering redundancy at an early stage
    Depending on function and criticality, computers, sensors, communication paths and actuators can be designed to be redundant and independent of one another. The required architecture is derived from the system and safety requirements.
  • Detecting and handling faults reliably
    Monitoring, plausibility checks and diagnostics help to detect faulty information and impermissible system states. Clear and verifiable system responses must be defined for detected faults.
  • Planning for compliance evidence from the outset
    Development and verification are aligned so that the required evidence can be built up step by step and traceably.
Three Silver Atena employees discussing technical information at a computer workstation in the development laboratory.
Silver Atena engineer closely examining a black electronic assembly with metal connectors.

Services for avionics and flight control systems

Depending on the project, development covers individual functions, an avionics computer or a complete avionics system.

  • Avionics and computer architecture

    The starting point is the functional, technical, timing and safety-related requirements, which are structured and managed by requirements engineering. Building on this, the system architecture defines the allocation of functions, processing units, sensor, actuator and communication interfaces as well as redundancy, monitoring and diagnostics.

  • Flight control computers

    Silver Atena develops control units and electronic platforms for a range of avionics architectures. A flight control computer processes sensor data, determines flight and system states, executes time-critical control functions and provides actuation commands for actuators. It also monitors system states and executes defined fault responses. Further functions such as attitude control or autopilot depend on the platform and the development scope.

  • Control and function development

    Algorithms for stabilisation, attitude control and other control functions are derived from the dynamic behaviour of the aircraft, the available sensor information and the actuation system. Simulation and model-based development support the design and early evaluation of the functions.

  • Embedded software development

    The embedded software implements control, communication, diagnostic and hardware-related functions on the avionics platform. Runtime behaviour, interfaces and fault handling are aligned with the system architecture, hardware and safety requirements.

  • Hardware development

    The hardware forms the electronic platform with processing units, memory, analogue and digital inputs and outputs, communication interfaces, power supply and monitoring functions, with redundancy where required. EMC behaviour, thermal boundary conditions, installation space and environmental conditions are taken into account during development.

  • Safety, security and redundancy

    The project-specific safety analyses result in requirements for the architecture and system responses. Depending on function and criticality, fail-safe, fail-silent or fail-operational characteristics may be required. Cyber security requirements are taken into account where networking or external interfaces are relevant to airworthiness.

Development process for avionics and flight control

Development combines requirements, system architecture, electronics, software, control engineering, integration and verification within a coordinated process.

  1. Analyse and validate requirements: Functional, technical, timing and safety-related requirements are analysed, structured, validated and checked for consistency and testability. Interfaces to the higher-level aircraft architecture are also taken into account.
  2. Define the system and computer architecture: Functions are allocated to system elements. Depending on the project, computers, sensors, actuators and communication interfaces are developed, specified or selected and aligned with the redundancy, monitoring and fault concepts.
  3. Develop hardware and embedded software: The electronic platform and the software running on it are developed on the basis of the defined architecture. Interfaces and integration steps are considered at an early stage.
  4. Develop flight control functions: Control algorithms are derived from the dynamic behaviour of the platform and the functional requirements. Simulation supports design, evaluation and tuning.
  5. Integrate the system step by step: Computers, software, control algorithms, sensors and actuator interfaces are brought together in stages. Functions, interfaces and fault responses are checked at each integration level.
  6. Verify and qualify functions: The integrated functions are verified against the defined requirements. Test systems and test benches support reproducible testing of functions, interfaces, edge cases and fault responses. Environmental qualification complements functional assurance with tests under the climatic, mechanical and electromagnetic conditions defined for the application.
Four Silver Atena employees examining an electrical coil assembly with copper windings in the development laboratory.

Methods and standards for avionics and flight control

Technologies and methods

Depending on the project, model-based development and simulation, safety and security assessments and redundancy and fault concepts are used. Assurance is provided through software-in-the-loop and hardware-in-the-loop tests, test automation and environmental and EMC qualification. On the HIL test bench, a real avionics computer is operated in a simulated aircraft environment. This allows sensor, actuator, communication and fault states to be examined reproducibly under defined conditions.

Standards and guidelines in aviation

Depending on the system, function, criticality, certification context and development scope, the following standards and guidelines may be particularly relevant:

  • SAE ARP4754B: Development of civil aircraft and systems
  • SAE ARP4761A: Safety assessment process for civil aircraft and systems
  • RTCA DO-178C: Software in airborne systems and equipment
  • RTCA DO-254: Electronic hardware in airborne systems
  • RTCA DO-160G: Environmental conditions and test procedures for airborne equipment
  • RTCA DO-326A / EUROCAE ED-202A: Airworthiness security
  • EN 9100: Quality management systems in aviation, space and defence

The applicable documents, issues, compliance objectives and design assurance levels are determined by the certification context and the system and safety requirements.

Applications of avionics and flight control

Possible applications of avionics and flight control systems include:

  • Flight control computers
  • Flight control systems
  • Attitude control
  • Autopilot functions
  • Monitoring and diagnostics
  • Redundant avionics computers
  • Flight control for unmanned aircraft
  • Platform-specific mission functions

The functions included in a specific development scope depend on the platform and the project requirements.

For the electronic control of aircraft engines, Silver Atena offers services in engine control.

Benefits for avionics and flight control projects

  • Developing computer and function together
    Hardware, embedded software and control functions are developed and integrated on the basis of a common system architecture.
  • Considering fault concepts at an early stage
    Redundancy, monitoring, diagnostics and defined system responses are taken into account during the architecture and development phase.
  • Preparing integration systematically
    Clearly defined interfaces and planned integration stages support the step-by-step integration of computer, sensors, actuators and flight control functions.
  • Planning evidence at an early stage
    Verification and qualification are aligned with the project-specific aerospace requirements during development. This allows requirements, implementation and evidence to be linked traceably.
Two Silver Atena employees examining a metal housing with a cylindrical component in the development laboratory.

Avionics and flight control across engineering disciplines

Avionics and flight control are closely linked to several development disciplines.

Why Silver Atena for avionics and flight control?

  • Interdisciplinary aerospace development
    Silver Atena combines requirements engineering, system development, hardware, embedded software, control engineering, safety, security and testing within a coordinated development process.
  • Considering computers, functions and interfaces together
    Development takes into account the interaction of the electronic platform, software, control algorithms, sensors, actuators and communication interfaces.
  • Combining development and assurance
    Test systems, HIL environments and qualification capabilities support development from architecture and integration through to verification and qualification.
Five Silver Atena employees discussing technical information at a computer workstation in the development laboratory.

Avionics and flight control for your aerospace project

Are you looking to develop or integrate a flight control computer, flight control functions or other safety-critical avionics systems? Talk to Silver Atena about your requirements and the development scope you need.

 Discuss your project