Electrifying aircraft functions step by step
More Electric Aircraft refers to the increasing use of electrical energy for aircraft functions that are conventionally driven hydraulically, pneumatically or mechanically. This development does not only affect individual components. It also changes the power supply, system architecture, power electronics, actuation, control and the safety and compliance concepts.
Silver Atena develops electrical and electronic systems for such applications. We combine system architecture, power electronics, electric actuation, control units, embedded software and verification within the overall system.
Challenges in electrical aircraft systems
Electrifying an aircraft function changes the entire technical function chain. In addition to the motor, an electric actuator requires a suitable power supply, power electronics, sensors, control, monitoring and a mechanical or electrohydraulic connection to the aircraft function. At the same time, the function must be integrated into the aircraft's electrical energy architecture, on-board power system and avionics. This creates dependencies between several disciplines.
These relationships must be taken into account during system development. Otherwise, late changes to the power supply or safety mechanisms can trigger adjustments to several components.
Four key design questions
- Overall system: How do power supply, electronics, software, actuation and mechanics work together?
- Electrical power: Which voltage levels, continuous power and peak power does the aircraft function require?
- Integration: What are the effects of heat loss, electromagnetic interactions, installation space and weight?
- Safety: Which diagnostics, redundancy, fault tolerance and system responses are required?
Services for electrified aircraft systems
The development scope can include individual electronic components, complete subsystems or their integration into the aircraft architecture.
System analysis and system architecture
The starting point is the functional and technical requirements for the respective aircraft function. Requirements engineering structures and manages the requirements. The system architecture allocates functions and requirements to the system elements and defines their interaction – depending on the application, including electrical consumers, power requirements and operating states.
Power supply and on-board power system
Electrified aircraft functions increase the demand for electrical power. Load profiles, load combinations, switch-on processes and fault states are therefore considered together, and the on-board power system architecture is aligned with consumers and power electronics. The electrical power budget shows which power and reserve must be available in which operating state. It is also defined which functions remain available in defined fault cases, how loads are prioritised and how energy flow and system states are monitored.
Power electronics for electrical on-board systems
Power electronics converts and controls electrical energy between the on-board power system and the consumer, for example with DC/DC converters or DC/AC inverters. The design takes into account voltage and power ranges, topology, power semiconductors, efficiency, power density, control, protection and diagnostics.
Electric and electromechanical actuation
Electric actuation combines motor, power electronics, sensors, control and mechanical function. System development takes into account electrical and mechanical interfaces as well as requirements for performance, dynamics, positioning, monitoring and fault responses. One specific example is Silver Atena's motor control electronics for electric slat and flap drives. They control the electric drive and its brake within the high-lift system.
Control units and embedded software
The control unit provides the electronic platform and the required interfaces. The embedded software implements control, regulation, communication, monitoring and diagnostic functions on this platform.
Safety and fault tolerance
In safety-critical systems, possible fault states, their effects and the required system responses are analysed. This results in requirements for fault detection, safe states, fault isolation and monitoring. The intended safety mechanisms must also be verified.
EMC, thermal design and power density
Electrical losses generate heat and influence the cooling concept, packaging, power density and permissible component stress. EMC and thermal management are therefore included in the architecture and electronics development from the outset. Mechanics and enclosure also determine thermal coupling, protection and installation conditions.
Development process for electrical on-board systems
- Analyse requirements: Function, electrical requirements, safety objectives and interfaces to the aircraft are described.
- Define the system and energy architecture: Subsystems, functions, energy paths, voltage levels, interfaces and operating states are defined.
- Design electronics and actuation: Control units, power electronics, sensors, motor, actuator and mechanics are aligned with one another.
- Develop software and control: Embedded software, diagnostics and control functions implement the defined functional architecture.
- Integrate components: Hardware, software, power electronics, sensors and actuation are brought together step by step.
- Verify, validate and qualify the system: Implementation of the requirements, suitability for the intended aircraft function and behaviour under defined environmental conditions are tested.
Standards for electrical aircraft systems
Which standards apply depends on the system, function, criticality, certification basis and development scope. Depending on the project, the following standards and guidelines may be particularly relevant:
- SAE ARP4754B: Development of civil aircraft and systems
- SAE ARP4761A: Safety assessment process for civil aircraft and systems
- RTCA DO-178C: Software in airborne systems and equipment
- RTCA DO-254: Electronic hardware in airborne systems
- RTCA DO-160: Environmental conditions and test procedures for airborne equipment
- EN 9100: Quality management systems in aviation, space and defence
The mention of a standard does not constitute a certification statement. The applicable issue, development objectives, test profiles and evidence are defined for the specific project.
Fields of application for aircraft electrification
More Electric Aircraft covers aircraft functions in which hydraulic, pneumatic or mechanical systems are electrified or supplemented by electrical solutions. Typical fields of application include:
- Electric and electromechanical actuators
- Slat and flap systems
- Electrical control and actuation functions
- Electric auxiliary units
- On-board power and power supply systems
- DC/DC converters
- Electrical cabin and supply systems
- Energy and power management
Electric and hybrid propulsion is covered separately under electric propulsion, which focuses on propulsion architecture, motor, inverter, energy source and propulsion system.
Benefits of coordinated system development
Considering system architecture, power supply, electronics and actuation together makes interactions visible earlier. Defined interfaces between on-board power system, control unit, power electronics, actuation and avionics support integration.
EMC, thermal behaviour and safety requirements are taken into account in architecture and component decisions. This allows fault responses and the necessary evidence to be planned early on. Specific improvements in mass, efficiency or integration effort, however, must be demonstrated on the respective system.
Aircraft electrification across engineering disciplines
- Requirements engineering and system architecture structure requirements, system elements and interfaces.
- Power supply and power electronics provide the required electrical power and control the energy flow.
- Hardware development and embedded software implement the functions of the control units.
- Functional safety derives requirements for architecture, interfaces, hardware, software and verification from the safety objectives.
- Testing and validation and environmental testing test function, fault responses and behaviour under defined environmental conditions.
Why Silver Atena for electrified aircraft systems?
Depending on the project scope, Silver Atena combines system development, hardware, embedded software, control engineering, power electronics, mechanics, safety and testing within the development process. This allows technical dependencies between the disciplines to be addressed together.
Our experience covers safety-critical aerospace electronics as well as electric actuation and motor control electronics for high-lift systems. Depending on the project, our scope of services ranges from requirements analysis and architecture through electronics and software development to integration, verification and qualification.
Electrical on-board systems for your aerospace project
Are you looking to electrify a hydraulic, pneumatic or mechanical aircraft function or develop a new electrical on-board system? Discuss the function, system architecture and the required development and compliance scope with our team.